Hittrafficer.com

The introduction of the motorized scooter by the Italian company Vespa in the 1960s gave birth to a scooter sub culture that reached across Europe, the UK and on to the States. Scooters could be seen taking over the streets and were especially prevalent in the hip, artsy communities within Paris and London, and as far reaching as San Francisco.

The genisis of the scooter culture was best exemplified in Quadrophenia by the Who, released in 1979. The rock opera tells the story of the mod revolution in the UK, the gang wars that erupted in the 1960s between the Rockers and the Mods, and the emergence of the scooter culture with all the lifestyle and fashion statements that came with it.

The scooter jacket as a direct spin off of the scooter culture is best defined by its Euro Style collar, a strip of material encircling the neck and fastening shut with a snap. Jackets can be made from the traditional leather or from synthetic or natural fabrics as fashion dictates.

In 1985, Vespa abandoned the U.S. market in favor of Europe, and as gas prices continued their painful rise, the European communities and the UK adopted the scooter as a cheaper form of transportation, while Americans indulged their love of SUVs.

Re entering the U.S. market in 2000, Vespa expected to cater to a new generation of hungry college students and twenty somethings looking for a cheap mode of transportation. What they found was a much more well to do market in the nostalgic Baby Boomers, reliving their younger days of bright and shiny scooters and motor bikes in general.

With the latest gas price hike of 2008, and increasing concern over the environment, middle class Americans are selling their SUVs and looking for alternative modes of transportation, and once again the scooter is thriving. Scooters are being seen more and more in urban environments, as people from all walks of life find a cheaper, more fun way to commute.

Following the scooter movement is the reemergence of the leather scooter jacket, as scooterists realize the need for body protection against the weather and the road.

Today’s modern scooter jackets offer an alternative to the traditional biker look. Scooter jackets come in a variety of materials, but just as in any type of bike riding, care should be given to protection from the elements and the road.

For that reason, the scooter jacket that is made from a quality leather material is considered to be an integral part of scooter safety gear, recommended to be worn with a full face protective helmet.

As the scooter culture merges with the mainstream, not everybody considering a scooter for transportation is your typical Mod, Rocker, or Biker type personality. One estimate has as many as 40% of new scooter purchases being made by women.

Scooterists of today span generations and coexist with a multitude of lifestyles. Scooter clubs, rallies, websites and forums are popping up all over the place, even scooter racing has taken afoot.

As an alternative to the traditional biker look, the scooter jacket exudes a respectable, conservative style that has become the signature of scooter culture, and popular with people from all walks of life.

Author Bio: Michael Talbert is the creator, owner, and operator of Biker Leather Ltd., an online retailer of fine leather and textile motorcycle jackets, leather chaps, vests and biker accessories. Visit the website at www.NakedLeatherBiker.com.

Category: Automotive
Keywords: scooter jacket,scooter motorcycle jacket,scooter,scooter culture

admin Uncategorized

As the popularity of Extreme Sports continues its rise, the concept of Motorcycle Racing has taken on new meaning. From road racing to Grand Prix, to motocross, supercross, and freestyle competition, one thing is for sure: if you race, you are going to fall off your bike on one or more occasions.

That being said, todays motorcycle racing jackets and apparel are designed taking this into consideration, and they compensate by giving you the best possible protection in the most likely places prone to injury. The basic principal is to design garments that will pad the most vulnerable body parts, and allow for a clean slide on asphalt or dirt without bunching up or tearing to shreds.

Racing jackets will and should come with some kind of body armor either fixed inside the jacket, or removable. Armor comes in different forms, from thick foams, to plastic covered compounds, to hard, shock absorbing rubbers.

When considering the purchase of a racing jacket and/or suit, make sure the armor is CE approved. Certifique Europe is a European standard of certification that grades armor on three levels, level 1 being the least protective, level 3 the most.

At the very least, a racing jacket should have protective armor at the shoulders and elbows, and pants should have extra protection at the knee and hip. In the case of a two piece racing suit, the bottom will often be zipped to the jacket, to allow the garment to act as one piece during a slide.

Back protectors are not often found in racing jackets, but there is in some jackets a place to insert one. Since most spinal injuries are caused by blows to the extremities as opposed to direct impact to the back, the back protector is better suited for protection from flying projectiles, and thus is often made from hard plastics.

Another major consideration for a racing jacket is the comfort factor.

Motorcycle jackets are usually made from a combination of materials, the basis of which is leather. Kevlar stitching can be used to insure the strength of the seams, and patches of Kevlar or other high stress synthetic materials are used on particularly vulnerable areas like the shoulders, elbows and knees. Stretch panels of various materials are often employed at strategic locations such as under the arms and at the knee to promote ease of movement in extreme conditions.

Because black leather has a natural tendency to be hot, racing jackets tend to be more colorful than your typical black leather jacket, using combinations of colors, obviously to attract attention to a particular racer, but also in part to reflect the heat of the suns rays. Some racing jackets employ perforated leather to allow the air to penetrate the jacket, and air vents are often used to provide circulation.

With modern synthetics gaining in popularity, many racers are choosing these tough and durable materials over leather because of their coolness, light weight, and waterproof characteristics. It is not uncommon to find legitimate racing gear that forego the use of leather altogether.

Whereas todays modern day motorcycle racing apparel employ all the technological know how to keep the racer safe and comfortable, racing jackets are also popular within the traditional biker community. A little bit of extra armor never hurts, and because many jackets use removable armor, you don’t have to look so robotic at your local biker bar.

Additionally, you don’t have to be stick with basic black, the colorful styles often found in the racing jacket genre add another layer of coolness for the biker to choose from!

Author Bio: Michael Talbert is the creator, owner, and operator of Biker Leather Ltd., an online retailer of fine leather and textile motorcycle jackets, leather chaps, vests and biker accessories. Visit the website at www.NakedLeatherBiker.com.

Category: Automotive
Keywords: Motorcycle Racing Jackets,Racing Suits,moto jacket,racing jacket,extreme sports jacket,motorcycle ja

admin Uncategorized